Hand Held Aspirators for Texturing and Drawing MachinesLight Weight and Highly Efficient Design!
The new AS 50 and AS 200 series aspirators ensure a quality string up of filament yarns at texturing, draw-winding and draw-twisting machines.
The compact design and the low weight enable easy handling of the equipment.
High-grade materials and covers ensure good wear resistance.
Depending on suction power or yarn tension requirements, AIR components can supply aspirators with twisting or non twisting jet systems.
Suction tubes and holders are available for all different types of common texturing machines.
Technical data
| Aspirator | AS 35 R | AS 50 R | AS 50 Z | AS
200 R |
| Denier max. | 1.500 den | 1.500 den | 1.500 den | 2.000 den |
| Yarn speed up to | 1.000 m/min | 1.500 m/min | 1.500 m/min | 2.000 m/min |
| Operation pressure max | 10 bar | 10 bar | 10 bar | 10 bar |
| Suction tube diameter | 5 mm | 5 mm | 5 mm | 6 mm |
| Air consumption at 6 bar | 35 Nm³/h | 50 Nm³/h | 50 Nm³/h | 150 Nm³/h |
| Weight | 0,5 kg | 0,5 kg | 0,5 kg | 0,5 kg |
| Working principle | Non twist | Non twist | Twist | Non twist |
|
